There is a significant likelihood that the stains in the toilet bowl are mineral deposits that have crystallized over time if cleansing them does not make them leave.

According to deep cleaning services Dubai, Hard water contains a high concentration of minerals, such as calcium and magnesium, which can leave stains on your toilet and get even more ingrained the longer they are allowed to remain there. Hard water is characterized by its high mineral content.

Let’s go to work removing those stubborn spots! The whiteness and shine of your toilet will return with time.

You may make baking soda and vinegar by following this recipe:

Baking soda and white vinegar are common household items used in cleaning. Cleaning your toilet using this method won’t require using harmful chemicals (without sacrificing efficiency, of course).

Step 1:  To begin, pour some vinegar into the jar.

To clean the toilet bowl, get a cup of vinegar, pour it into the bowl, and then scrape the inside with a toilet brush. After that, let the ingredients sit for a minute. Vinegar is inherently acidic, so it will start working immediately to dissolve the mineral deposits.

Step 2: Add the baking soda to the liquid.

Baking soda and vinegar should each be added to the toilet bowl in the ratio of one cup of baking soda to two cups of vinegar. Because a chemical reaction occurs when baking soda and vinegar are combined, you shouldn’t be startled if you notice the mixture starting to bubble. It should set ten minutes aside for the solution to rest.

Step 3: Begin brushing.

Start scrubbing the toilet bowl with the solution (especially on stubborn stains) when you’re done. You can expect the baking soda and vinegar to dissolve the grime on the surface. Please only flush when necessary! In any case, keep going till it’s done.

Step 4: Rinse and hold off till later.

Let’s give it half an hour before we go into the answer. A few more rounds of swishing the solution around should do the trick of removing the stains.

Hard water stains can be removed using a toilet brush if they persist. Once the stain-removal process has been completed, you can flush the toilet to finish cleaning it. Your toilet bowl should now be completely dry.

The pumice stone procedure can be used to remove difficult stains:

If stubborn stains persist, you can try yet another method. Contrarily, this approach is more difficult than the water and vinegar method. As a result, you ought to limit how often you do this. Audit firms in Dubai told that It could damage the bathroom toilet if this is not avoided.

You only need a pumice stone and a few minutes of your time to complete this task. To begin scrubbing, put on a pair of rubber gloves.

• Stone and the area to be scrubbed should be wetted first (keep them both wet as you work).
• Scrub the stained areas with a circular motion and some pressure; you should see a grey paste forming. Worry not! It crushed the pumice stone and mixed the powder with water to form the paste.
• All the benefits are yours for the taking! After rubbing the paste into the stains to remove the mineral buildup, you should rinse the area thoroughly.

By cleaning your toilet regularly, you can avoid unsightly stains:

Because the stains are caused by mineral buildup, the most effective method for avoiding them is to clean them consistently. Try washing the toilet once a week. In this method, you can prevent the minerals from becoming more solid.